Stacks Image 570

Crimping Presses

Stacks Image 513

EPS 2000


Eccentric Press
Processing of cross sections up to 6 mm²

Description

This standard crimp machine is designed for crimping terminals using Schaefer quick change applicators and for stripping cables using Schaefer stripper modules and for using both at the same time, in one single operation.

For manual operation and set up a hand-wheel is integrated. With the mechanical counter, it is easy to monitor the production run and control the wear parts.


Range of Application
Schaefer crimp machines are used in the series production of the cable processing industry.


Examples Of Use
Eccentric presses are designed to connect wires and terminals in multiple applications.


Product Combination Possibilities
For the quality management the crimp monitoring system can be added on. Also stripping modules 512, 513 and 514 can be integrated.

Stacks Image 517

EPS 3000


Eccentric Press
Processing of cross sections up to 12 mm²


Description
This standard crimp machine is designed for crimping terminals using Schaefer quick change applicators and for stripping cables using Schaefer stripper modules and for using both at the same time, in one single operation.

The EPS 3000 is based on the EPS 2001 construction but with a reinforced gearbox, a stronger motor and a strengthened eccentric shaft with a double cylinder roller bearing.

For manual operation and set up a hand-wheel is integrated. The machine control system with display allows to select the language and the machine status or individual functions can be prompted.


Range of Application
Schaefer crimp machines are used in the series production of the cable processing industry.


Examples Of Use
Eccentric presses are designed to connect wires and terminals in multiple applications.


Product Combination Possibilities
For the quality management the crimp monitoring system can be added on. Also stripping modules 512, 513, 514 and 515 can be integrated.

Stacks Image 515

EPS 2001


Eccentric Press
Processing of cross sections up to 6 mm²


Description
This standard crimp machine is designed for crimping terminals using Schaefer quick change applicators and for stripping cables using Schaefer stripping modules and for using both at the same time, in one single operation.

For manual operation and set up a hand-wheel is integrated. The machine control system with display allows to select the language and the machine status or individual functions can be prompted.


Range of Application
Schaefer crimp machines are used in the series production of the cable processing industry.


Examples Of Use
Eccentric presses are designed to connect wires and terminals in multiple applications.


Product Combination Possibilities
For the quality management the crimp monitoring system can be added on. Also stripping modules 512, 513, 514 and 515 can be integrated.

Stacks Image 529


Stacks Image 531


Stacks Image 533


Stacks Image 568


Stacks Image 574


Crimping Applicators

Stacks Image 545

20.2001

Quick Change Applicator
Transverse Transport with Mechanical Side Feed


Description
The crimping applicator 20.2001 with quick change system is made for crimping transversely belted terminals on wires with cross sections up to 6 mm².

This applicator is designed with an indexed rotary head for reproducible, independent crimp height adjustment of both the wire and insulation. With the optional mechanical counter, it is easy to monitor the production run and control the wear parts.


Range of Application
Schaefer crimping applicators are used in the series production of the cable processing industry.


Examples Of Use
Crimping applicators to connect wires and terminals in multiple applications made for bench top crimp machines and also as equipment for semi or fully automated systems.


Product Combination Possibilities
The applicator 20.2001 can be used in Schaefer crimp machines and if designed accordingly also with Schaefer stripping modules.

Stacks Image 549

Four Point Crimping Applicator

Specific Quick Change Applicator
Symmetric Crimp Connections with Loose Piece Terminals


Description
The four-point crimping applicator can be used on crimp machines with quick-change mounting. It is designed for processing loose piece, machined terminals, in manual or fully automatic feed systems. Easy to change crimp inserts permit switching from one terminal to another.

This applicator is designed with an indexed rotary head for reproducible, independent crimp height adjustment of both the wire and insulation.


Range of Application
Schaefer crimping applicators are used in the series production of the cable processing industry.


Examples Of Use
Crimping applicators for symmetric wire connections.

Stacks Image 547

30.2001

Quick Change Applicator
Longitudinal Transport with Mechanical Rear Feed


Description
The crimping applicator 30.2001 with quick change system is made for crimping longitudinally belted terminals on wires with cross sections up to 6 mm².

This applicator is designed with an indexed rotary head for reproducible, independent crimp height adjustment of both the wire and insulation. With the optional mechanical counter, it is easy to monitor the production run and control the wear parts.


Range of Application
Schaefer crimping applicators are used in the series production of the cable processing industry.


Examples Of Use
Crimping applicators to connect wires and terminals in multiple applications made for bench top crimp machines and also as equipment for semi or fully automated systems.


Product Combination Possibilities
The applicator 30.2001 can be used in Schaefer crimp machines and if designed accordingly also with Schaefer stripping modules.